收藏本站
HMR2300
COMMAND INPUTS
A simple command set is used to communicate with the HMR2300. These commands can be automated; or typed in real-
time while running communication software programs, such a windows hyperterminal.
Command
Format
Inputs (1)
*ddWE *ddA
*ddWE *ddB
Response (2)
ASCII_ON?
BINARY_ON?
Bytes (3)
9
10
Description
ASCII – Output Readings in BCD ASCII Format (Default)
Binary – Output Readings in Signed 16-bit Bianary
Format
Output
Sample Rate
*ddP
*ddC
Esc
*ddWE *ddR=nnn
{x, y, z reading}
{x, y, z stream}
{stream stops}
OK?
7 or 28
...
0
3
P = Polled – Output a Single Sample (Default)
C = Continuous – Output Readings at Sample Rate
Escape Key – Stops Continuous Readings
Set Sample Rate to nnn Where:
Nnn = 10, 20, 25, 30, 40, 50, 60, 100, 123, or 154
Samples/sec (Default = 20)
Set/Reset
Mode
Set/Reset
Pulse
Device ID
Baud Rate
*ddWE *ddTN
*ddWE *ddTF
*ddWE *ddT
*dd]S
*dd]R
*dd]
*99ID=
*ddWE *ddID=nn
*99WE *99!BR=S
S/R_ON?
S/R_OFF?
{Toggle}
SET?
RST?
{Toggle}
ID=_nn?
OK?
OK?
7
8
7 or 8
4
4
4
7
3
14
S/R Mode: TN – ON = Auto S/R Pulses (Default)
TF – OFF = Manual S/R Pulses
*ddT Toggles Command (Default = On)
] Character – Single S/R: ]S -> SET = Set Pulse
]R -> RST = Reset Pulse
Toggle Alternates Between Set and Reset Pulse
Read Device ID (Default = 00)
Set Device ID Where nn = 00 to 98
Set Baud Rate to 9600 bps (Default)
BAUD_9600?
*99WE *99!BR=F
OK?
BAUD=_19,200?
14
Set Baud Rate to 19,200 bps
(8 bits, no parity, 1 stop bit)
Zero Reading
Average
Readings
Re-Enter
Response
Query Setup
*ddWE
*ddWE
*ddWE
*ddWE
*ddWE
*ddWE
*ddWE
*ddWE
*ddZN
*ddZF
*ddZR
*ddVN
*ddVF
*ddV
*ddY
*ddN
*ddQ
ZERO_ON?
ZERO_OFF?
{Toggle}
AVG_ON?
AVG_OFF?
{Toggle}
OK?
OK?
{See Desc.}
8
9
8 or 9
7
8
7 or 8
3
3
62-72
Zero Reading Will Store and Use Current as a Negative
Offset so That the Output Reads Zero Field
*ddZR Toggles Command
The Average Reading for the Current Sample X(N) is:
Xavg=X(N)/2 + X(N-1)/4 + X(N-2)/8 + X(N-3)/16 + ...
*ddV Toggles Command
Turn the “Re - Enter” Error Response ON (*ddY) or OFF
(*ddN). OFF is Recommended for RS-485 (Default = ON)
Read Setup Parameters. Default: ASCII, POLLED, S/R
ON, ZERO OFF, AVG OFF, R ON, ID=00, 20 sps
Default Settings
*ddWE *ddD
OK?
14
Change All Command Parameter Settings to Factory
BAUD=_9600?
Default Values
Restore Settings
*ddWE *ddRST
OK?
BAUD=_9600?
14
Change All Command Parameter Settings to the Last
User Stored Values in the EEPROM
or
BAUD=_19,200?
16
Serial Number
Software Version
*dd#
*ddF
SER#_nnnn?
S/W_vers:_
22
27
Output the HMR2300 Serial Number
Output the HMR2300 Software Version Number
nnnn?
Hardware
*ddH
H/W_vers:_
19
Output the HMR2300 Hardware Version Number
Version
nnnn?
Write Enable
*ddWE
OK?
3
Activate a Write Enable. This is required before
commands: Set Device ID, Baud Rate, and Store
Parameters.
Store
Parameters
Too Many
*ddWE *ddSP
Wrong Entry
DONE?
OK?
Re-enter?
8
9
This writes all parameter settings to EEPROM. These
values will be automatically restored upon power-up.
A command was not entered properly or 10 characters
Characters
were typed after an asterisk (*) and before a <cr>.
Missing WE
Write Enable Off
WE_OFF?
7
This error response indicates that this instruction requires
Entry
a write enable command immediately before it.
(1) All inputs must be followed by a <cr> carriage return, or Enter, key. Either upper or lower case letters may be used. The device ID
(dd) is a decimal number between 00 and 99. Device ID = 99 is a global address for all units.
(2) The “?” symbol is a carriage return (hex 0D). The “_” sign is a space (hex 20). The output response will be delayed from the end of
the carriage return of the input string by 2 msec (typ.), unless the command sent as a global device ID = 99.
www.honeywell.com
7
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
HMR3000-DEMO-232 KIT DEMO DIG COMPASS MODUL RS232
HMU-PATBH101KQ-3M CABLE ASSEMBLY MU FIBER OPTIC 3M
HP-BRACKET ACCY BRACKET FOR HP RELAYS
HP100SS HOLE PLUG 1" STAINLESS STEEL
HP100 HOLE PLUG 1" STEEL
HP125SS HOLE PLUG 1.25" STAINLESS STEEL
HP125 HOLE PLUG 1.25" STEEL
HP150SS HOLE PLUG 1.50" STAINLESS STEEL
相关代理商/技术参数
HMR2300-D21-485 功能描述:MAGNETOMETER RS485 W/CASE RoHS:否 类别:传感器，转换器 >> 磁性 - 罗盘，磁场（模块） 系列:HMR 标准包装:490 系列:- 轴:X，Y，Z 测量范围:±1.3 ~ 8.1高斯，±2，4，8高斯 用于测量:制导，间距和卷 分辨率:8 毫高斯 类型:数字罗盘 封装/外壳:28-VFLGA 接口:I²C 配用:497-10689-ND - BOARD ADAPTER LSM303DLH DIL24 其它名称:497-10474
HMR2300R 制造商:HONEYWELL 制造商全称:Honeywell Solid State Electronics Center 功能描述:THREE-AXIS STRAPDOWN MAGNETOMETER
HMR2300R (422) 制造商:Honeywell SSEC 功能描述:Three Axis Strapdown Magnetometer
HMR2300R-422 功能描述:MAGNETOMETER RS232 3 AXIS RoHS:否 类别:传感器，转换器 >> 磁性 - 罗盘，磁场（模块） 系列:HMR 标准包装:490 系列:- 轴:X，Y，Z 测量范围:±1.3 ~ 8.1高斯，±2，4，8高斯 用于测量:制导，间距和卷 分辨率:8 毫高斯 类型:数字罗盘 封装/外壳:28-VFLGA 接口:I²C 配用:497-10689-ND - BOARD ADAPTER LSM303DLH DIL24 其它名称:497-10474
HMR2300R-485 功能描述:MAGNETOMETER RS485 3 AXIS RoHS:否 类别:传感器，转换器 >> 磁性 - 罗盘，磁场（模块） 系列:HMR 标准包装:490 系列:- 轴:X，Y，Z 测量范围:±1.3 ~ 8.1高斯，±2，4，8高斯 用于测量:制导，间距和卷 分辨率:8 毫高斯 类型:数字罗盘 封装/外壳:28-VFLGA 接口:I²C 配用:497-10689-ND - BOARD ADAPTER LSM303DLH DIL24 其它名称:497-10474
HMR3000 制造商:HONEYWELL 制造商全称:Honeywell Solid State Electronics Center 功能描述:Digital Compass Module
HMR3000 DEMO KIT 制造商:HONEYWELL 功能描述:DEMONSTRATION KIT, Kit Contents:Enclosed Compass Module, Cables With Power Sourc 制造商:Honeywell Microelectronics And Precision Sensors 功能描述:DEMONSTRATION KIT, Kit Contents:Enclosed Compass Module, Cables With Power Source, Software, User Guide, Leaded Process Compatible:No, Peak Reflow Compatible (260 C):No, Accessory Type:Digital Compass Module , RoHS Compliant: No 制造商:Honeywell Sensing and Control 功能描述:DEMONSTRATION KIT, Kit Contents:Enclosed Compass Module, Cables With Power Sourc
HMR3000-232-DEMO 功能描述:HMR3000 HMR Magnetic, Digital Compass Sensor Evaluation Board 制造商:honeywell microelectronics & precision sensors 系列:HMR 零件状态:有效 传感器类型:磁性，数字式罗盘 感应范围:±1g 接口:RS-232 灵敏度:1 毫高斯 电压 - 电源:6 V ~ 15 V 嵌入式:否 所含物品:板，线缆，电源 使用的 IC/零件:HMR3000 标准包装:1